Wondering
"Where-'n-'Ell"
to get great parts for your outboard?

Right Here!

A Fun Old Porcelain Sign and Ancient Tools

Sign Reads "Wanted: Good Woman Must Be Able To Clean, Cook, Sew, Dig Worms, and Clean Fish. Must Have Boat and Motor. Please Send Picture of Boat and Motor."

Meet the MasterTech!
(click picture)

If your Mfgr. says:

That motor's 7 years old!!
Part is no longer available.
We lose $$ on service!
EPA made me do it!
Part's at central warehouse, you'll get it next month.
We don't make parts for those.
We only do warranty work.
Our techs only fix late models.
No clue what's wrong! So we'll work time & material.

Baloney!!

Contact
the Mastertech!

		In Your Cart: Items

FORCE TORQUE SPECS

SPECIAL SETTINGS FOR 3-4 CYLINDER 1996-UP MODELS
1995 & Older HERE

CYLINDER HEAD BOLTS THRU SERIAL # 0E138599		225 IN. LBS.
CYLINDER HEAD BOLTS FROM SERIAL # 0E138600		120 IN. LBS. + 90° (1/4 TURN) FINAL
CYLINDER HEAD COVER BOLTS		70 IN. LBS.
FLYWHEEL NUT		125 FT. LBS.
MAIN BEARING BOLTS		270 IN. LBS.
CONNECTING RODS SCREWS		120 IN. LBS. + 90° (1/4 TURN) FINAL
POWER HEAD MOUNTING BOLTS		50 FT. LBS.
EXHAUST PORT COVER BOLTS		115 IN. LBS.
GEAR HOUSING TO LEG BOLTS		160 IN. LBS.
PINION GEAR NUT		70 FT. LBS.

ALL OTHER STANDARD HARDWARE

SCREW or NUT SIZE		TORQUE
	6-32	9 IN. LBS.
	8-32	20 IN. LBS.
	10-24	30 IN. LBS.
	10-32	35 IN. LBS.
	12-24	45 IN. LBS.
	1/4-20	70 IN. LBS.
	5/16-18	160 IN. LBS.
	3/8-16	270 IN. LBS.

CYLINDER HEAD TORQUE SEQUENCE 1996-UP
(TORQUE IN 3 STAGES, INCREASING BY 1/3 EACH TIME THROUGH UNTIL FULL SPEC IS REACHED)


3 CYLINDER	4 CYLINDER

We pay the freight out in USA on all orders over $100.00. Orders less than this amount will have a shipping and handling charge of $8.75 added. Some bulky and heavy items will incur additional charges. You will be notified beforehand if this is the case. All orders normally ship via USPS. Remember, all orders receive free technical support from the MasterTech!

Please review our Warranty, Returns & Refunds policies before you place an order.

DISCLAIMER

The information provided on these pages is correct to the best of my knowledge, however the MasterTech makes no warranty, express or implied, regarding the use of, results of, or liability created from, application of this data. This information is disseminated in good faith, however MasterTech assumes NO LIABILITY whatsoever in regard to this service. The information, software, products, and services published on this web site may include inaccuracies or typographical errors. Changes are periodically added to the information herein. Mastertech may make improvements to this site at any time. Parts ordered from this website may or may not be in dealer stock at the time of order. Thank you for reading.

Revised: November 19 2019