CHRYSLER OUTBOARD COOLING SYSTEM PARTS -- MASTERTECH MARINE

Wondering
"Where-'n-'Ell"
to get great parts for your outboard?

Right Here!

Early Chrysler Impeller

VRO Pump Rebuild Kit

Meet the MasterTech!
(click picture)

If your Mfgr. says:

That motor's 7 years old!!
Part is no longer available.
We lose $$ on service!
EPA made me do it!
Part's at central warehouse, you'll get it next month.
We don't make parts for those.
We only do warranty work.
Our techs only fix late models.
No clue what's wrong! So we'll work time & material.

Baloney!!

Contact
the Mastertech!

		In Your Cart: Items

Chrysler Outboards

COOLING SYSTEM PARTS

Concerned about your cooling system? Try our cooling system tips page.

CHRYSLER IMPELLERS
To install impeller, flip the housing upside down and turn impeller down into housing in direction shown: (lubricate inside of housing first with a film of outboard oil or other lubricant) then flip housing right side up and slide down driveshft. Rotate the driveshaft CLOCKWISE until the keyway mates with the impeller so housing slides all the way down and install housing to gearcase. Impellers are impeller only, no gaskets, unless noted.
HP	MODEL	SERIAL #	IMPELLER
3.5 4	1980-84 1976-84		F521065-1
5	1976		F429065-2
6, 7.5	Using this design gearcase		F429065-2
6, 7.5	Using this design gearcase and 6-VANE impeller		F525065-1 IS NO LONGER AVAILABLE!
6, 7.5	Using this design gearcase and 10-VANE impeller		F521065-1
7.5, 8 9.2 (Autoelectric)	Using this design gearcase		F429065-2
9.9, 10, 15	Using these design gearcases:		8903
20	Many early 1970's using this design gearcase		F901065-1
20	Many thru 1978 with this design gearcase		8903
25	1975 - 1978		8903
20, 30	thru 1978 with this design gearcase		8901
20, 30 25	1979 - 1982 1981 - 1984		8901
35, 45	with 5/8" diameter shaft, 6-vane		F433065-2
35	1976 - 1978 with 9/16" shaft, 10-vane		8901
35	1979 - 1982 with 5/8" shaft, 10-vane		3084
35	1983 - 1984 with 9/16" shaft, 10-vane		8901
45, 50	ALL		F433065-2
55	All 1975-76		3084
55, 65	1977-83 note: 10-vane impellers upgraded to this 6-vane		F474065-1
70	1" tall impeller		18-3085
70	3/4" tall impeller		F438065-1
75	Thru 1978 1979 except Models T750H9A & T750H9B below		F438065-1
75 85	1979 Models T750H9A & T750H9B 1980-84 All with 1" Tall Vanes		3065
85, 90	1973-77 3/4" Tall Vanes		F438065-1
90	1983-84		3065
100, 115	ALL MODELS 1979-1984		3065
105	1966-1973 (Check HERE if not sure of year)		18-3085
105	1974-1976 (Check HERE if not sure of year)		F438065-1
105	1977-1984 (Check HERE if not sure of year)		3065
120	1206/1207HA-HE, 1208HA-HC		18-3085
120	All Others		F438065-1
125	All		3065
135	1976		F438065-1
135	1977		3065
140	1978-84		3065
150	1508HA		MTM89984
CHRYSLER THERMOSTATS
HP/TYPE	YEAR	THERMOSTAT	DEGREE
20 30 35 45 50 55	1979-1982 1973-1975, 1979 1970-84 1970-84 1981-84 1970-76	1042	130°
70 75 85 90 105 120 130 135	Though 1978 1975-77 1970-73 1974-77 1970-76 1970-75 1972 1971, 1974-76	422	143°
70 75 85 90 100 105 115 120 & 135 125 140	1979-1980 1978-1984 1977-1984 1983-1984 1979-80 1977-78 1977-80 1977 1981-1982 1978-1984	F528068KIT	110°

CHRYSLER WATER PUMP KITS
WATER PUMP KIT WITH HOUSING	CHRYSLER 3.5, 5 HP 1977 UP	NO LONGER AVAILABLE
WATER PUMP KIT	CHRYSLER 6, 8 HP 1978 UP	-NLA- Component Parts Only
WATER PUMP KIT WITH HOUSING	CHRYSLER 9.9 / 15 HP 1968 UP CHRYSLER 12 HP 1979 CHRYSLER SAILOR MODELS 250, 280 CHRYSLER 20, 25 HP 1973 - 78	FK1031-1
WATER PUMP KIT WITH HOUSING	CHRYSLER 6 HP 1979 - 80 CHRYSLER 7.5 HP 1979 - 84	-NLA- Component Parts Only
WATER PUMP KIT WITH HOUSING	CHRYSLER 20 HP 1979 - 82 CHRYSLER 25 HP 1981 - 84 CHRYSLER 30 HP 1979 - 82 CHRYSLER 35 HP 1983 - 84	FK1053
WATER PUMP KIT WITH HOUSING	CHRYSLER 70 THRU 135 HP WITH 2 PIECE GEARCASE	FK1033-1
WATER PUMP KIT WITH HOUSING	CHRYSLER 20, 25 HP 1978 CHRYSLER 45 HP 1979 - 84 CHRYSLER 50 HP 1981 - 83	FK1073
WATER PUMP KIT WITH HOUSING	CHRYSLER 55 HP, 60 HP 1978 - 80 WITH 2 PIECE GEARCASE	FK1070
CHRYSLER/FORCE WATER PUMP KIT WITH HOUSING	MOTORS WITH 1-PIECE GEARCASE: CHRYSLER 75 HP, 1980-84 CHRYSLER 85-140 HP 1977-84 CHRYSLER 90 HP 1983-84 CHRYSLER 125 HP 1981-82	750-115

CHRYSLER COOLING PARTS
DESCRIPTION	PART #	PRICE	SELECT
IMPELLER	F521065-1	$105.50 (not a misprint; available only from Mercury)
IMPELLER	F429065-2	$32.00
IMPELLER	F474065-1 Original was a 10-vane impeller, replacement is 6-vane	$43.00
IMPELLER	F525065-1 NO LONGER AVAILABLE as of 10/2021 There is no aftermarket version.	--	--
IMPELLER	F901065-1 discontinued, limited quantity left!	$62.00
IMPELLER	F438065-1 3/4" tall vanes PLEASE CHECK IMPELLER HEIGHT!! FOR 1 " TALL IMPELLER SEE # 3065 see here for gasket	$26.75
IMPELLER	MTM89984 For plastic housing w/Stainless Cup	$11.25
IMPELLER	MTM-3065 1" tall vanes PLEASE CHECK IMPELLER HEIGHT!! FOR 3/4" TALL IMPELLER SEE # F438065-1	$14.25
IMPELLER	3084	$35.00
IMPELLER	18-3085	temporarily unavailable
IMPELLER	F433065-2	$25.50
PUMP KIT	46-819026A1	No Longer Available	NO LONGER Available
IMPELLER	8901	$42.00
IMPELLER	8903 upgraded version:, thicker vanes, more volume, longer wearing	$15.50
PUMP KIT	FK1031-1	Discontinued We may be able to find one, generally around $192.00	Check With Us -- We May Be Able To Find One For You Contact Us
PUMP KIT	FK1033-1 This is an updated kit. The original 10-vane impeller has been replaced with a 6-vane, 13/16 " diameter shaft size. Original style impeller pictured.	$187.00
PUMP KIT	750-115	$99.75
PUMP KIT	FK1070	No Longer Available We can often find one, generally around $135.00	Check With Us -- We May Be Able To Find One For You Contact Us
PUMP KIT	FK1073	$313.00
PUMP KIT	FK1053	$199.00 No Longer Made We have limited availability
THERMOSTAT 130°	1042	$34.00
THERMOSTAT KIT 110°	F528068KIT	$53.75
THERMOSTAT 143°	422	$25.75
Grommet for most later 2-cylinder thermostats	F658504	$5.25
Grommet for most early 2-cylinder Chrysler thermostats	F84504 Groove inside, fits around thermostat	$9.90
HOUSING GASKET for Housings using impeller # F438065-1	18-0417	$2.00
T-STAT GASKET Many older 2-cylinder Chrysler	27-819377	$2.00

We pay the freight out in USA on all orders over $100.00. Orders less than this amount will have a shipping and handling charge of $8.75 added. Some bulky and heavy items will incur additional charges. You will be notified beforehand if this is the case. All orders normally ship via USPS. Remember, all orders receive free technical support from the MasterTech!

Please review our Warranty, Returns & Refunds policies before you place an order.

DISCLAIMER

The information provided on these pages is correct to the best of my knowledge, however the MasterTech makes no warranty, express or implied, regarding the use of, results of, or liability created from, application of this data. This information is disseminated in good faith, however MasterTech assumes NO LIABILITY whatsoever in regard to this service. The information, software, products, and services published on this web site may include inaccuracies or typographical errors. Changes are periodically added to the information herein. Mastertech may make improvements to this site at any time. Parts ordered from this website may or may not be in dealer stock at the time of order. Thank you for reading.

Revised: April 29 2022