  |
Wondering Right Here! |
|
Meet the MasterTech!
|
If your Mfgr. says: That motor's 7 years old!!
Part is no longer available. We lose $$ on service! EPA made me do it! Part's at central warehouse, you'll get it next month. We don't make parts for those. We only do warranty work. Our techs only fix late models. No clue what's wrong! So we'll work time & material.
Baloney!! Contact
|
|
|
|||||||||||||||||
Remanufactured by OBR in Alabama. Cylinder heads and components are cleaned and inspected throroughly for defects and damage. Heads are lightly milled for trueness if necessary. Excessive warpage, pitting, and other damage cause it to be rejected for rebuilds. Camshafts, rockers, valves, and associated hardware are checked against factory tolerances and rejected if out of spec. All new seals are installed. UPS/FedEx service and any core charge is included in price. These rebuilt heads carry a 1-year warranty. Here's a picture from our tour of the facility in November 2016 of the Haas milling machine setup used to true up components that are slightly out of factory specs to insure tight fit.
Core charge, if required, is included in price, and is refundable (pro-rated depending on condition of core). PLEASE SUPPLY YOUR MOTOR SERIAL NUMBER in the provided spaces at checkout so we can verify the application is correct. |
|||||||||||||||||
We pay the freight out in USA on all orders over $100.00. Orders less than this amount will have a shipping and handling charge of $8.75 added. Some bulky and heavy items will incur additional charges. You will be notified beforehand if this is the case. Remember, all orders receive free technical support from the MasterTech! |
|||||||||||||||||
|
Please review our Warranty, Returns & Refunds policies before you place an order. DISCLAIMER The information provided on these pages is correct to the best of my knowledge, however the MasterTech makes no warranty, express or implied, regarding the use of, results of, or liability created from, application of this data. This information is disseminated in good faith, however MasterTech assumes NO LIABILITY whatsoever in regard to this service. The information, software, products, and services published on this web site may include inaccuracies or typographical errors. Changes are periodically added to the information herein. Mastertech may make improvements to this site at any time. Parts ordered from this website may or may not be in dealer stock at the time of order. Thank you for reading. Revised: December 15 2017
| |||||||||||||||||
