MasterTech
Marine
Bulletin Board
Overton's
For everything else boating related.

Wondering
"Where-'n-'Ell"
to get great parts for your outboard?

Right Here!

 

I'm Restoring A 1955 Merc MK55 Sandcast

1955 Mark 55 Sandcast Restoration

 

Meet the MasterTech!

Bill the Master Tech

 

If your Mfgr. says:

That motors 7 years old.
Part is no longer available.
We lose $$ on service!
EPA made me do it!
Parts at central warehouse, you'll get them next month.
We don't make parts for those.
We only do warranty work.
Our techs only fix late models.
No clue what's wrong! So we'll work time & material.

Baloney!!

Contact
 the Mastertech!

 


,

 
banner with sunset over water in ship yard
 
 


Click here to order by phone

Important!!! You must allow JavaScript to run to use the drop-down navigation menu.
Please allow a few moments for the menu to load.
INTERNET EXPLORER users must also " allow blocked content" if the pop-up appears.
 


#703 ECONOMY COMPRESSION TESTER

Compression is the FIRST test you should perform on any engine!

#703 COMPRESSION TESTER
Use this one when you have no clearance problems. For professional compression service I recommend # 702
  • Tester screws into 14 mm spark plug hole on outboard engines.
  • Use to check for low compression.
  • Measures up to 200 psi or 14 kgs.
  • Will help diagnose engine problems such as: burnt valves, scored cylinders, leaking head gaskets, tight tappets, broken valve springs, broken rings, damaged pistons.

 

Price: $31.00
plus $8.75 postage and handling.

To order by phone, please call
1-850-623-1197


 
 

Please review our Warranty, Returns & Refunds policies before you place an order.

DISCLAIMER

The information provided on these pages is correct to the best of my knowledge, however the MasterTech makes no warranty, express or implied, regarding the use of, results of, or liability created from, application of this data. This information is disseminated in good faith, however MasterTech assumes NO LIABILITY whatsoever in regard to this service. The information, software, products, and services published on this web site may include inaccuracies or typographical errors. Changes are periodically added to the information herein. Mastertech may make improvements to this site at any time. Parts ordered from this website may or may not be in dealer stock at the time of order. Thank you for reading.

Site best viewed at 1024 x 768 resolution or higher with Firefox 1.5-up, Netscape 6, or IE 5 or higher

© 1999-2009 MasterTech Marine
Revised 10-21-09