Mastertech PROVIDES EVINRUDE JOHNSON WISECO, VERTEX AND PRO PISTONS, RINGS WRIST PINS

Bulletin Board

Overton's
For everything else boating related.

Wondering
"Where-'n-'Ell"
to get great parts for your outboard?

Right Here!

TYPICAL WISECO CROSSFLOW PISTON

Wiseco 3064

Meet the MasterTech!

If your Mfgr. says:

That motor's 7 years old.
Part is no longer available.
We lose $$ on service!
EPA made me do it!
Parts at central warehouse, you'll get them next month.
We don't make parts for those.
We only do warranty work.
Our techs only fix late models.
No clue what's wrong! So we'll work time & material.

Baloney!!

Contact
the Mastertech!

Important!!! You must allow JavaScript to run to use the drop-down navigation menu.
Please allow a few moments for the menu to load.
INTERNET EXPLORER users must also " allow blocked content" if the pop-up appears.

REPLACEMENT PISTONS

V4 & V6

2 & 3 Cylinders are here

MASTERTECH presents pistons for rebuilding your motor. These are PRO-V cast pistons unless noted.
PRO-V PISTONS HAVE A GRAY MOLY COATING TO REDUCE FRICTION & HEAT BUILD-UP DURING BREAK-IN.
WISECO forged perfomance pistons available at extra charge. Most WISECO pistons are available in additional oversizes not available in PRO-V.
All pistons come complete with rings, wristpins and retainers.

Some V4 & V6 motors have different port & starboard pistons. If you need them all use the "full set" option. If you need, for instance, only 2 port & 2 stb pistons on a V6, select "2" in the "port" box , click "add to cart", return here via your browser "back" button, then repeat the procedure but select "2" in the "stb"box the second time, then click "add to cart" again. We will then know you need only 2 of each side. Thanks!

NOTE!! Please take the time to enter the model number of your motor.
This info will be stored in the shopping cart and sent in with your order.

V4 Crossflow 85 HP 1973 ONLY 0.660 TO BOTTOM OF SKIRT FROM BOTTOM OF WRISTPIN HOLE WILL FIT 1969-72 WITH WP15-1 WRIST PIN BEARING These pistons available in WISECO only		Piston Part #3175 STD BORE SIZE = 3.375" QTY: Size: $138.00 each
V4 Crossflow 85 HP 1974-1978 0.80 TO BOTTOM OF SKIRT FROM BOTTOM OF WRISTPIN HOLE These pistons available in WISECO only		Piston Part #3176 STD BORE SIZE = 3.375" QTY: Size: $132.00 each
V4 Crossflow 115 HP, 135 HP 1973 ONLY 16 ROLLER CRANK, 3.5" BORE 0.660 TO BOTTOM OF SKIRT FROM BOTTOM OF WRISTPIN HOLE These pistons available in WISECO only		Piston Part #3174 STD BORE SIZE = 3.500" QTY: Size: $127.00 each
V4 Crossflow 65 JET 1991-94 80 JET 1991-97 85 HP 1979-80; 1991-95 88 SPL 1988-96 90 HP 1981-97	100 HP 1979-80 110 HP 1986-89 112 SPL 1994-96 115 HP 1974-85, 1990-97 135 HP 1974-76 140 HP 1977-84	Piston Part #1300 STD BORE SIZE = 3.500" QTY: Size: $87.00 each
V6 All Crossflow 3.5" BORE 1976-91		Piston Part #1300 STD BORE SIZE = 3.500" QTY: Size: $87.00 each
V6 All Crossflow 3.625" Large Bore 1980-86		Piston Part #2993 STD BORE SIZE = 3.625" QTY: Size: $104.00 each
V-4 60° 90-115 HP 1995-2004 105 JET 1993-2000 V-6 60° 150-175 HP 2001-2004	PORT Piston Part #V3300P STD BORE SIZE = 3.600" QTY: Size: $117.00 each	STB Piston Part #V3300S STD BORE SIZE = 3.600" QTY: Size: $117.00 each
	FULL SET (2 of each side (V4) $460.00
	FULL SET (3 of each side (V6) $695.00
V-4 FICHT® 75 HP 2000-2004 90-115 HP 1999-UP 135 HP 2000-2004 V-6 FICHT® 150-175 HP 1998-UP	PORT Piston Part #5000P STD BORE SIZE = 3.600" QTY: Size: $145.00 each	STB Piston Part #5000S STD BORE SIZE = 3.600" QTY: Size: $145.00 each
	FULL SET (2 of each side (V4) $575.00
	FULL SET (3 of each side (V6) $864.00
V-4, V6, V8 90° Loopers 3.5" Small Bore 1985-1987	PORT Piston Part #V1800P STD BORE SIZE = 3.500" QTY: Size: $88.00 each	STB Piston Part #3118SS STD BORE SIZE = 3.500" QTY: Size: $86.00 each
	FULL SET 2 of each side (V4) $340.00
	FULL SET 3 of each side (V6) $512.00
	FULL SET 4 of each side (V8) $680.00
V-4, V6, V8 90° Loopers 3.685" Large Bore 1988-UP Carburetted NOTE: Except 200 OCEAN PRO & OCEAN RUNNER -- SEE BELOW	PORT Piston Part #V1900P STD BORE SIZE = 3.685" QTY: Size: $101.00 each	STB Piston Part #V1900S STD BORE SIZE = 3.685" QTY: Size: $101.00 each
	FULL SET 2 of each side (V4) $400.00
	FULL SET 3 of each side (V6) $600.00
	FULL SET 4 of each side (V8) $800.00
V6 90° 200 & 225 HP OCEAN PRO/OCEAN RUNNER 1993-2000 FINGER PORTED 250 HP CARB ONLY	PORT Piston Part #V4300P STD BORE SIZE = 3.685" QTY: Size: $103.00 each	STB Piston Part #V4300S STD BORE SIZE = 3.685" QTY: Size: $103.00 each
	FULL SET (3 of each side) $602.00
V6 90° 200 - 225 HP 3.0L FICHT® 1991-2001 NOT FOR FH & FLH225 (HO MODELS)!!	PORT Piston Part #6000P STD BORE SIZE = 3.685" QTY: Size: $116.50 each	STB Piston Part #6000S STD BORE SIZE = 3.685" QTY: Size: $116.50 each
	FULL SET (3 of each side) $690.00
V6 90° 200 - 225 HP 3.3L FICHT® 2000-2004 These pistons available in WISECO only	PORT Piston Part #3180PS STD BORE SIZE = 3.854" QTY: Size: $126.50 each	STB Piston Part #3180SS STD BORE SIZE = 3.854" QTY: Size: $126.50 each
	FULL SET (3 of each side) $748.00

Please review our Warranty, Returns & Refunds policies before you place an order.

DISCLAIMER

The information provided on these pages is correct to the best of my knowledge, however the MasterTech makes no warranty, express or implied, regarding the use of, results of, or liability created from, application of this data. This information is disseminated in good faith, however MasterTech assumes NO LIABILITY whatsoever in regard to this service. The information, software, products, and services published on this web site may include inaccuracies or typographical errors. Changes are periodically added to the information herein. Mastertech may make improvements to this site at any time. Parts ordered from this website may or may not be in dealer stock at the time of order. Thank you for reading.

Site best viewed at 1024 x 768 resolution or higher with Firefox 1.5-up, Netscape 6, or IE 5 or higher